How To Set Up Miroir Micro Projector
Miroir M190 Mini Pro Projector
QUICK SET-UP GUIDE
© 2022 Miroir USA, LLC. All rights reserved. Miroir and the Miroir logo are owned past Miroir Us, LLC. All other trademarks are the property of their respective owners. Miroir U.s.a., LLC assumes no responsibility for any errors that may announced in this manual. Information independent herein is subject field to change without find.
Your Miroir Mini Pro Projector
Battery Indicator Lights – Lights flash in plough every bit the device charges. The bombardment is fully charged when all the lights illuminate and no longer flash.
Projection Lens – Turns power on.
Sound Out (3.5mm) – (Optional) Connect an external speaker or headphones.
HDMI Video Input – Connect an HDMI cable to a device that supports HDMI video output.
USB Power Output – Connect a USB ability cable to provide power to a HDMI streaming stick or to charge a smartphone bombardment. Cannot be used for video input.
USB-C Video/Charge Input – Connect any uniform USB-C accuse/ video cablevision to a device that supports USB-C video output, or power adapter that supports charging. (not included)
Reset Button – Press to reset projector.
Power Port – Connect included Air conditioning Adapter/Charger for power. Fully charge battery before the showtime employ (approx. 4-5 hours).
Mode Button – Press mode push button to change from HDMI to USB–C video.
Controls – Increase/subtract the volume output of the projector.
Press +/- together to change from ECO to Normal manner.
Normal mode is maximum effulgence but shorter battery life.
Focus Controls – Turn bike to adjust focus.
Rubber Foot Pads – Provides stability and proper airflow to cooling vents.
Cooling Vent – IMPORTANT: Practice non comprehend or block airflow to the vent.
Kicking Stand – Kicking Stand out to elevate front end.
Troubleshooting
The image is blurry
- Adjust the projected image'southward focus past rolling the focus wheel forwards or backwards.
- Bank check that the surface y'all are projecting on is smooth and non-reflective.
- Check that the projector's lens is make clean and free of debris.
The image is not square
- Bank check that the projector's lens is parallel to your projection surface and that your projection surface is flat.
No sound
- Check the volume control on your source device to ensure the book is turned up.
- Check the volume command on the projector to ensure the volume is turned up.
- If you are using an adapter, verify that the adapter supports audio.
- Check that the HDMI cable is fully plugged into the HDMI port.
No Signal Bulletin
- Cheque that you lot are using the required cable and/or adapter.
- If you lot are using a digital AV adapter, bank check that the adapter is an authentic Apple tree adapter and is compatible with your model phone or tablet.
- If y'all are connecting via USB-C, bank check that you are using the USB-C video cablevision that came with the projector – this cablevision is labeled "USB-C Video Connector." Some USB-C cables do not support video.
- If yous are connected to a laptop or computer, check your computer display settings to ensure a multiple brandish selection is selected (such as "duplicate these displays").
- Check that your source device supports HDMI video out or USB-C video out.
Projector volition non ability on, or stay powered on
- Check the bombardment life of the projector past briefly pressing the power button on the projector. If one or fewer lights illuminate, charge the battery with the USB-C cable or power adapter.
- Check that you lot are plugging the USB-C cable into the USB-C power Input port and not the USB-C Video input port on the projector.
www.miroirusa.com
MICRO190.07.26.2021
Documents / Resources
References
Source: https://manuals.plus/miroir/m190-mini-pro-projector-manual

0 Response to "How To Set Up Miroir Micro Projector"
Post a Comment